Remove the midstream test from the foil pouch and take off the cap.

Be careful not to contaminate the test by keeping it away from surfaces, clothing and skin.

Hold the test by the handle with the exposed tip pointing downward.

Either urinate directly onto the tip for at least 10 seconds or urinate into a clean, dry container and dip the tip into the urine for at least 10 seconds.

Avoid getting urine on the Test and Control window.

After wetting the tip, immediately replace the cap over the tip.

This protects the test and ensures accurate results.

Lay the midstream test on a flat surface with the Test and Control window facing upwards.

Start timing to allow the test to develop properly.

Wait at least 5 minutes for the red line(s) to appear.

As the test begins to work, you may notice a light red flow moving across the Test and Control window.

If no red line appears after 5 minutes, wait one minute longer.

Do not read the result after 10 minutes to avoid incorrect results.

Two red lines in the test (T) and control (C) window indicate a positive result, suggesting pregnancy.

One red line next to the control (C) window indicates a negative result, meaning no pregnancy.

If no red line appears, or there is no red line next to the control (C) window, the result is invalid.